High Optical Feedback Tolerance of a Detuned DBR Laser for 10-Gbps Isolator-Free Operation
Author(s): Yang, QL (Yang, Qiulu); Lu, D (Lu, Dan); He, YM (He, Yiming); Zhou, DB (Zhou, Daibing); Zhao, LJ (Zhao, Lingjuan)
Source: PHOTONICS Volume: 10 Issue: 1 Article Number: 38 DOI: 10.3390/photonics10010038 Published: JAN 2023
Abstract: The optical feedback tolerance (OFT) of a distributed Bragg reflector (DBR) laser was investigated experimentally. The static and modulation performance of the DBR laser under optical feedback was examined by evaluating its relative intensity noise (RIN) and bit error rate (BER). It is shown that the OFT of the DBR laser is closely related to its peak wavelength detuning relative to the Bragg wavelength. A high tolerance to optical feedback was demonstrated, both in the continuous wave (CW) and the direct modulation (DM) states, when the DBR laser was red-detuned relative to the Bragg wavelength. The excess RIN induced by optical feedback was well suppressed to a level of -140 dB/Hz at a feedback level of -9 dB in the CW state. In a 10 Gbps direct modulation state, bit error rates (BER) below 1 x 10(-9) and 3 x 10(-7) were obtained under a feedback level of -15 dB and -9 dB, respectively, for the case of back-to-back transmission. After 20 km fiber transmission, the BER still maintained below 1 x 10(-7) under a feedback level of -15 dB, with a power penalty of less than 1 dB.
Accession Number: WOS:000915966000001
eISSN: 2304-6732
Full Text: https://www.mdpi.com/2304-6732/10/1/38