A Model of Dual Fabry-Perot Etalon-Based External-Cavity Tunable Laser Us...
Internal motion within pulsating pure-quartic soliton molecules in a fibe...
Enhanced light emission of germanium light-emitting-diode on 150 mm germa...
The Fabrication of GaN Nanostructures Using Cost-Effective Methods for Ap...
Negative-to-Positive Tunnel Magnetoresistance in van der Waals Fe3GeTe2/C...
Quantum Light Source Based on Semiconductor Quantum Dots: A Review
A High-Reliability RF MEMS Metal-Contact Switch Based on Al-Sc Alloy
Development of a Mode-Locked Fiber Laser Utilizing a Niobium Diselenide S...
Development of Multiple Fano-Resonance-Based All-Dielectric Metastructure...
Traffic Vibration Signal Analysis of DAS Fiber Optic Cables with Differen...
官方微信
友情链接

Fabrication and Characterization of Low-Threshold Single Fundamental Mode VCSELs With Dielectric DBR Mirror

2021-07-22

 

Author(s): Qiu, PP (Qiu, Pingping); Wu, B (Wu, Bo); Fu, P (Fu, Pan); Li, M (Li, Ming); Xie, YY (Xie, Yiyang); Kan, Q (Kan, Qiang)

Source: IEEE PHOTONICS JOURNAL Volume: 13 Issue: 4 Article Number: 1500106 DOI: 10.1109/JPHOT.2021.3089710 Published: AUG 2021

Abstract: The SiO2/SiNx dielectric film stacks deposited by inductively coupled plasma chemical vapor deposition (ICP-CVD) are employed on the top of the oxide-confined vertical-cavity surface-emitting lasers (VCSELs). The reflecting mirror characteristics of the dielectric films are measured with varying numbers of pairs from 4 to 12. The prepared devices have low threshold current of 0.3 mA, single-mode peak power of 1.4 mW at room temperature. The thermal resistance of the device depending on ambient temperature is estimated according to the relationship of wavelength shift and dissipated power, allowing us to extract the actual temperature in active region and the temperature dependence of the output characteristics of the VCSEL. The beam property of the device is characterized by the far field pattern (FFP). Depending on the drive current, the average divergence angles of the output beam estimated from the full-width-half-maximum (FWHM) of the FFP varies between 20.4 degrees and 21.2 degrees. Furthermore, polarization-controlled single mode emission is achieved by introducing a built-in grating into the VCSEL with orthogonal polarization suppression ratio (OPSR) around 19 dB.

Accession Number: WOS:000670542900003

ISSN: 1943-0655

eISSN: 1943-0647

Full Text: https://ieeexplore.ieee.org/document/9457164



关于我们
下载视频观看
联系方式
通信地址

北京市海淀区清华东路甲35号(林大北路中段) 北京912信箱 (100083)

电话

010-82304210/010-82305052(传真)

E-mail

semi@semi.ac.cn

交通地图
版权所有 中国科学院半导体研究所

备案号:京ICP备05085259-1号 京公网安备110402500052 中国科学院半导体所声明