A Model of Dual Fabry-Perot Etalon-Based External-Cavity Tunable Laser Us...
Internal motion within pulsating pure-quartic soliton molecules in a fibe...
Enhanced light emission of germanium light-emitting-diode on 150 mm germa...
The Fabrication of GaN Nanostructures Using Cost-Effective Methods for Ap...
Negative-to-Positive Tunnel Magnetoresistance in van der Waals Fe3GeTe2/C...
Quantum Light Source Based on Semiconductor Quantum Dots: A Review
A High-Reliability RF MEMS Metal-Contact Switch Based on Al-Sc Alloy
Development of a Mode-Locked Fiber Laser Utilizing a Niobium Diselenide S...
Development of Multiple Fano-Resonance-Based All-Dielectric Metastructure...
Traffic Vibration Signal Analysis of DAS Fiber Optic Cables with Differen...
官方微信
友情链接

MBE growth of mid-wavelength infrared photodetectors based on high quality InAs/AlAs/InAsSb superlattice

2021-05-20

 

Author(s): Jiang, JK (Jiang, Jun-Kai); Li, Y (Li, Yong); Chang, FR (Chang, Fa-Ran); Cui, SN (Cui, Su-Ning); Chen, WQ (Chen, Wei-Qiang); Jiang, DW (Jiang, Dong-Wei); Wang, GW (Wang, Guo-Wei); Xu, YQ (Xu, Ying-Qiang); Niu, ZC (Niu, Zhi-Chuan); Che, RC (Che, Ren-chao); Zhang, CJ (Zhang, Chuan-jie); Huang, L (Huang, Li)

Source: JOURNAL OF CRYSTAL GROWTH Volume: 564 Article Number: 126109 DOI: 10.1016/j.jcrysgro.2021.126109 Published: JUN 15 2021

Abstract: InAs/InAsSb type-II superlattices (T2SLs) with long minority carrier lifetimes are promising candidate for InAs/ GaSb T2SLs. In this work, we insert AlAs layers into InAs layers to fabricate the InAs/AlAs/InAsSb SLs, applicated in mid-wavelength infrared detection with 5.1 ?m cut-off wavelength. We grew InAs/InAsSb SLs on GaSb substrate by MBE in order to confirm the Sb component in InAsSb layer. Meanwhile, the Sb component versus growth temperature and Sb/As BEP flux ratio was explored in the experiment. After that, 5.6/2.2/5.6/8 ML InAs/AlAs/InAs/InAsSb SLs was grown on GaSb influenced by the growth ratio of AlAs. Experiment data indicates that AlAs layers inserted in InAs layers have a narrow growth rate window in the vicinity of 0.3ML/s for high-quality layer-by-layer growth with RMS 1.7 ? characterized by AFM. Then, the optimal growth temperature is found as Tc with RMS reducing to the minimum 1.7 ? and hardly distinct dislocation morphology. Transmission Electron Microscope is necessary method to characterize the microstructure of superlattice. With samples characterized by HRTEM, it is demonstrated that a period contains four layers with the dark layers representing for InAsSb layers and the three bright layers standing for InAs-AlAs-InAs interlayer structure, which interfaces also exhibit clearly. Finally, quality of SLs epitaxy was researched by HRXRD, varying interfaces between InAs and AlAs layers. The intermediate products InAlAs have been eliminated and the FWHMs descend to 30?40 arcsec with the method of 3-second As soak interface.

Accession Number: WOS:000642452000005

ISSN: 0022-0248

eISSN: 1873-5002

Full Text: https://www.sciencedirect.com/science/article/pii/S0022024821000853?via%3Dihub



关于我们
下载视频观看
联系方式
通信地址

北京市海淀区清华东路甲35号(林大北路中段) 北京912信箱 (100083)

电话

010-82304210/010-82305052(传真)

E-mail

semi@semi.ac.cn

交通地图
版权所有 中国科学院半导体研究所

备案号:京ICP备05085259-1号 京公网安备110402500052 中国科学院半导体所声明